Use:
Step 1
Pull the pin. This will also break the tamper seal.
Step 2
Aim low, pointing the extinguisher nozzle at the base of the fire.
Step 3
Squeeze the handle to release the extinguishing agent.
When using the ReinoldMax 6kg-S dry powder fire extinguisher, do not take breaks and extinguish the fire continuously. Spray the extinguishing agent with one squeeze of the handle.
During testing, the ReinoldMax 6kg-S fire extinguisher was proven to extinguish the fire of 9 kg dry powder fire extinguisher. The discharge time of ReinoldMax 6kg is only 20.6 seconds, so do not extinguish the flame, but the source of the fire. A few minutes after using the fire extinguisher, the extinguishing powder may clog the hose nozzle. Therefore, even if you have not sprayed all the extinguishing agent, you must immediately return the fire extinguisher for recharge. Make sure the pointer of the pressure gauge in green area.
For a fire to burn, all three elements of the fire triangle must be present: heat, fuel and oxygen. To put out the fire, it is necessary to eliminate one of these elements. ReinoldMax 6kg-S dry powder fire extinguisher is charged with 90% ABC Dry Chemical. Dry chemical powder puts out the fire by coating the burning material with a thin layer of dust, thereby separating the fuel from the oxygen in the air. In case of a large fire, it is recommended to use several ReinoldMax fire extinguishers.
Fire extinguishers of this type are excellent at extinguishing fires of various types and can be used at temperature up to -30°C. When extinguishing a fire indoors or in a vehicle, remember that the dry powder in ABC fire extinguishers is toxic so try not to inhale toxic gases. After using the fire extinguisher, ventilate the vehicle and wash your hands. Fire extinguishing powder does not dissolve in water, so it is recommended to vacuum the room thoroughly and remove the contents of the vacuum cleaner as quickly as possible.
Model: RM 6000
Net weight: 6 kg
Gross weight: 9.76 kg
Temperature range: -30°С/+60°С
Fire rating: 55A 233B C
Discharge time: 20.6 sec.
Fire extinguishing agent: ABC 90%
Separated material: N2
Use: in production and warehouse facilities, public places, parking lots, inside buildings under construction, gas stations. Suitable for extinguishing electrical devices up to 1000 V.