Use:
Step 1
Pull the pin. This will also break the tamper seal.
Step 2
Aim low, pointing the extinguisher nozzle at the base of the fire.
Step 4
Squeeze the handle to release the extinguishing agent.
When using the ReinoldMax 50kg dry powder fire extinguisher, do not take breaks and extinguish the fire continuously. Spray the extinguishing agent with one squeeze of the handle.
The discharge time of ReinoldMax 50kg is only 50 seconds, so do not extinguish the flame, but the source of the fire. A few minutes after using the fire extinguisher, the extinguishing powder may clog the hose nozzle. Therefore, even if you have not sprayed all the extinguishing agent, you must immediately return the fire extinguisher for recharge. Make sure the pointer of the pressure gauge in green area.
For a fire to burn, all three elements of the fire triangle must be present: heat, fuel and oxygen. To put out the fire, it is necessary to eliminate one of these elements. ReinoldMax 50kg dry powder fire extinguisher is charged with 50% ABC Dry Chemical. Dry chemical powder puts out the fire by coating the burning material with a thin layer of dust, thereby separating the fuel from the oxygen in the air. In case of a large fire, it is recommended to use several ReinoldMax fire extinguishers.
When extinguishing a fire with a dry powder fire extinguisher, additional measures should be taken to cool heated elements of equipment or building structures. It should not be done when extinguishing electronic equipment, computers, and electrical cars.
Fire extinguishers of this type can be used at temperature range from -20°C to +60°C.
Model: RM50
Net weight: 50 kg
Gross weight: 72 kg
Temperature range: -20°С/+60°С
Fire rating: A, BI, C
Fire extinguishing agent: ABC 50%
1866-1:2007 CE0062